Advanced installation parameters

With Portworx, you can specify additional parameters at installation.

Specify the RAID level for local storage

Portworx supports two RAID level configurations for local storage: RAID 0, and RAID 10.

Follow these steps to specify the RAID level Portworx should use at installation.

1. Log in to Portworx Central to generate a spec.

2. Download the manifest and use the args section of the Portworx DaemonSet to specify the RAID level.

   • The following example specifies RAID 0:

   args:
     ["-k", "etcd:http://70.0.0.65:2379", "-c", "kockica-11", "-d", "eth1", "-m", "eth1", "-s", "/dev/sdb", "-secret_type", "k8s", "-raid", "0",  
     "-x", "kubernetes"]
   note

   All other arguments, apart from the ones that specify the RAID level, are examples. Be sure to use values that match your environment.

   • The following example specifies RAID 10:

   args:
     ["-k", "etcd:http://70.0.0.65:2379", "-c", "kockica-11", "-d", "eth1", "-m", "eth1", "-s", "/dev/sdb", "-secret_type", "k8s", "-raid", "10",  
     "-x", "kubernetes"]

3. Continue with the steps from the Apply the specs section.